This tester is used to determine the protective capability of the safety glove against cutting. But, it is not available for safety glove made by hard materials. A driving rotation round blade under a specified load cuts the glove held by the fixture of tester to and fro. After test, compare it with its original statuses to get the results.
| 规范 |
EN388-2016
|
GB/T 20991-2007
|
| 测试荷重 | 5±0.5N | 5±0.05N |
| 圆形刀片 | 直径45±0.5mm；厚0.3±0.03mm 总切割角30～35° 刀片硬度700～720HV |
直径45±0.5mm；厚0.3±0.03mm 总切割角30～35° 刀片硬度740～800HV |
| 切割行程 | 50mm | 50mm |
| 切割速度(线速度) | 8±2cm/s | 10cm/s |
| 计数器 | LCD液晶显示0～9999999.9 | |
| 电源 | 1∮ AC 220V 50/60HZ（依国别或指定） | |
WeChat Public
www.gotech.biz
Copyright © 2021 高铁检测仪器(东莞)有限公司 保留所有权利. 粤ICP备18135710号
